Publicidad
Step 24
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D30 and D31).
å
Fasten the DRAWER RIGHT (40CC) to the RIGHT DRAWER SIDE (D30)
å
and the DRAWER LEFT (40CD) to the LEFT DRAWER SIDE (D31). Use
four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #2 and #4.
NOTE: The screw head in the CAM must be visible through the slotted
å
hole in the SLIDE.
Fasten a PULL (7K) to the DRAWER FRONT (M). Use two SILVER 3/4"
å
MACHINE SCREWS (20S).
3
4
SILVER 3/4" MACHINE SCREW
(2 used for the PULL)
www.sauder.com/services
Roller end
1
2
7K
20S
GOLD 5/16" FLAT HEAD SCREW
10A
D31
M
(4 screws per drawer)
3S
(4 used in this step)
420166
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
D30
2
3
4
Roller end
1
Page 29
Publicidad
