Publicidad
Step 26
To insert the DRAWER (M) into your unit, tip the front of the drawer down and drop the rollers on the drawer behind the
å
rollers on the unit. Lift the front of the drawer up and slide it into the unit.
NOTE: Before inserting a drawer, be sure the INNER CARTRIDGE in the EXTENSION RAIL on your unit is all the way
å
forward. The INNER CARTRIDGE should click into place against the BLACK TAB.
To insert the LARGE DRAWER (N) into your unit, line up the EXTENSION SLIDES on the drawer with the EXTENSION
å
RAILS on the unit and push the drawer into the unit until the drawer is fully inserted. The drawer will push in hard until it is
all the way in, then it will slide in and out easier. Repeat this step to insert the PENCIL DRAWER (O).
See the next step for DRAWER adjustments.
å
Insert a GROMMET (10P) and GROMMET CAP (1P) into the large hole in the TOP (E).
å
Insert the METAL PINS (1R) into the holes in the LEFT END (B) and LEFT UPRIGHT (D). Set the ADJUSTABLE SHELF (J)
å
onto the METAL PINS.
Push a CAM COVER (13P) onto each HIDDEN CAM in the LEFT UPRIGHT (B).
å
Front
Black tab
15 lbs.
J
B
30 lbs.
13P
(3 used)
To cover HIDDEN CAMS
www.sauder.com/services
Click the inner cartridge into place against the black tab.
Inner cartridge
60 lbs.
E
5 lbs.
O
D
20 lbs.
30 lbs.
N
Extension Rail
1R
(4 used)
M
420166
1P
10P
Place the roller on the SLIDE
behind the roller on the RAIL.
Page 31
Publicidad
