Technical Specifications - Polaroid OneStep 2 Manual De Instrucciones

Customer
USA/Canada
usa@polaroidoriginals.com
Support
+212 219 3254
Europe/Rest of World
The Polaroid Originals Customer service@polaroidoriginals.com
Support Team is always more 00 800 577 01500
than happy to hear from you. Get
in touch using the contact details Impossible B.V.
provided. For more detailed and P.O. Box 242
up-to-date information, visit 7500 AE Enschede
polaroidoriginals.com/help The Netherlands
Technical
Materials
Outer shells
Specifications
Polycarbonate + ABS plastics
Lens
Optical grade polycarbonate
General lens, coated
Dimensions Shutter system
150mm (L) ×111mm (W) ×97mm (H) Custom design using precision
Weight step motor
460 grams (without film pack)
Optical System
Operating Temperature
40–108°F / 4–42°C, 5–90% Lens
relative humidity Fixed focus lens
Compatible Film Focal length
Polaroid Originals i-Type and 600 106mm
type film in both Color and Black & Field of view
White, including Special Editions. 41 degrees vertical,
Battery 40 degrees horizontal
High performance lithium-ion
battery, 1100mAh, 3.7V nominal Flash System
voltage, 4.07Wh Vacuum discharge tube strobe
Safety Information
• Power consumption varies depending
on the environment the device is used in
and how the device has been stored. Used
Caution — / immediately after full charge, the battery
risk of electric shock do not open
will power the processing of up to 20 film
disassemble the motorized roller system
• Do not disassemble the device. Incorrect packs with flash exposures. Due to the
reassembly can cause electrical shock if high energy requirements of the flash, we
the device is used again. recommend charging the camera fully
• Do not immerse the device in water or before every session for best results.
other fluids. • Once the battery energy level falls below
• Do not operate the device in a high a certain level, the device will no longer
humidity environment or very dusty process film. The LED will blink and signal
environments. when it needs to be recharged. This is to
• Do not attempt to tamper with, adjust or avoid a photo getting stuck as it is being
remove the battery and/or the electronics processed through the roller system.
located below the rollers behind the • The rechargeable battery is not fully
device's film door. charged at the time of purchase. Charge
• Do not attempt to remove the door itself the battery fully with the USB charging
as it is connected electronically to the cable (provided). This usually takes 1-2
body of the device. Doing so is unsafe, will hours (can vary depending on usage).
likely damage your device, and will void • The supplied battery charging cable has
your warranty. been tested to work with the Apple iPhone
• Do not insert metal objects into the power adaptors. While it can be used in
device. other USB ports e.g. computer, USB power
• Do not insert any objects into the rollers adaptors, TVs, cars etc., correct operation
or gears. cannot be guaranteed.
• Keep small children and infants away from • When the device is no longer in use,
device to avoid them being injured by the please recycle it properly.
device's moving parts.
• Do not use or store the device near any Usage Environment
heat source or any type of equipment • To protect the high-precision technology
that generates heat, including stereo contained in this device, never leave the
amplifiers. camera in the following environments
• Do not use the device near flammable or for extended periods of time: high
explosive gases. temperature (+42°C/108°F), high
• Do not charge the device if you notice any humidity, places with extreme changes
unusual odors, noise or smoke. in temperature (hot and cold), direct
• Do not attempt to disassemble the film's sunlight, sandy or dusty environments
battery or modify it in any way (if using such as beaches, damp places, or places
600-type film). If battery fluid gets in with strong vibrations.
your eyes, immediately rinse your eyes • Do not drop the device or subject it to
with fresh, cold running water and seek severe shocks or vibrations.
medical attention immediately. • Do not push, pull or press on the lens.
Battery and Charger
• This device uses a custom lithium-ion
battery that is non-removable and
mounted inside the camera body.
No other type of battery can be used.
Battery replacement can only be done
by authorized service centers. The battery
will provide many years of service if
properly used.