Inserting The Battery Pack; Setting The Date And Time; Setting The Time Format (12H Or 24H Time Format) - Riester RBP-100 Manual Del Usuario

2.3 INSERTING THE BATTERY PACK

2.3.1 Open the battery compartment (10) on the backside of the device.
2.3.2 Connect the cable of the rechargeable battery pack with the cable, that is inside of the
battery compartment.
2.3.3 Insert the battery pack and close the battery compartment.
2.3.4 Plug in the mains adapter into the mains adapter socket (11) and fully charge the
batterypack until the LED battery indicator (7) is lightning in green.
2.3.5 Switch the power switch (8) on.
• When you press a button, the backlight is active for 10 seconds. Without further operation,
after 10 seconds the backlight automatically turns off.

2.4 SETTING THE DATE AND TIME

2.4.1 To adjust date and time, press the SET button (4) once to enter the settings menu; cycle
between different adjustments using "+"(5) and "-"(6) buttons until SET (23), and the
clock /calendar icons (16) appears in the display.
2.4.2 Press the SET button (4) to enter date and time adjustment. Upon entering date and
time adjustment, year will blink.
2.4.3 Press the "+" (5) and/or "-"(6) buttons to adjust the year; press the SET button to confirm
the adjustment. The next adjustment – month – will appear and blink.
2.4.4 Follow the instructions above to adjust the settings of month, day, hour, and minute.
Press and hold "+" (5) or "-" (6) button for fast increment and decrement.
2.4.5 Once you have set the minutes and pressed the SET button, the device moves back to
Stand-by Mode.
• Press the Start/Stop button (3), if you want to abort the time adjustment and return to
stand-by mode.

2.5 SETTING THE TIME FORMAT (12H OR 24H TIME FORMAT)

2.5.1 To set the time format, press the SET button (4) once to enter the settings menu; cycle
between different adjustments using "+"(5) and "-"(6) buttons until SET (23), the clock
icon and "PM" (16) appears in the display.
2.5.2 Press SET button (4) again to enter time format adjustments; SET (23) and current time
format (24H: 18:00 or 12H: 06:00 PM) will appear.
2.5.3 You can now select between 12h and 24h time format by pressing the "+" (5) and "-" (6)
buttons.
RBP-100