Publicidad
Step 16
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D20 and D21).
å
Fasten a DRAWER RIGHT (35GC) to the DRAWER RIGHT SIDE (D20)
å
and a DRAWER LEFT (35GD) to the DRAWER LEFT SIDE (D21). Use
four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #3.
NOTE: The screw head in the CAM must be visible through the
å
slotted hole in the SLIDE.
Fasten a KNOB (25K) to the LARGE DRAWER FRONT (N). Use a
å
BLACK 7/8" MACHINE SCREW (37S).
Repeat this step for the other drawer.
å
2
3
37S
BLACK 7/8" MACHINE SCREW
(2 used for the KNOBS)
Page 20
Roller end
1
D21
25K
10A
N
(4 screws per drawer)
GOLD 5/16" FLAT HEAD SCREW
(8 used in this step)
418238
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
D20
2
3
3S
www.sauder.com/services
Roller end
1
Publicidad
