Publicidad
Step 4
First, fi ll the holes in the LEGS (L and M) 1/4 to 1/2 full
å
with GLUE (54M). Then, insert the WOOD DOWELS (15F)
into the holes. Wipe away the excess GLUE.
Now, fi ll the holes in the BRACE (H) 1/4 to 1/2 full
å
with GLUE.
Fasten the LEGS (L and M) to the RIGHT END (A) and
å
BRACE (H). Tighten six HIDDEN CAMS.
NOTE: Be sure the WOOD DOWELS in the LEGS insert
å
into the holes in the BRACE. Wipe away the excess GLUE.
Edge with CAM DOWELS
These surfaces
should be even.
1
Page 8
These surfaces
should be even.
A
Surface with
CAM SCREWS
M
2
H
418238
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
Fill the holes 1/4 to 1/2 full with GLUE.
L
15F
www.sauder.com/services
54M
Publicidad
