Taurus 997150 Manual De Instrucciones página 5

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Problem
The compressor works
abnormally with a Buzzing
noise.
ADD WATER indicator
light is on.
Indicator lights on display are
not on.
The Ice made is too large
and with pieces sticking
together.
Conditions for Ice making
Cycle are right but no ice is
made.
ICE FULL and ADD WATER
indicator lights come on at
the same time.
Machine keeps running,but
the water is warmer than the
normal water.
997150_IM.indd 5
Possible Cause
Suggested Solutions
The voltage is lower
Stop the ice maker and do not restart
than recommended.
until the voltage is normal.
1.There is no water,
1. Press the stop button, fill with water,
2.The pump is full
of air.
2. Remove the silicon stopper and let
Blown fuse/ No
Replace fuse / Turn power on.
power.
1. Ice of previous
1. Stop the unit right away,restart the
cycles left in the
water tray.
2. Shift the evaporator a little.
2. The evaporator is
too low.
1. There is no
Call for service.
refrigerant in the
compressor.
2. Compressor is
broken down Fan
motor is broken.
Water tray is blocked
Clear the ice cube under the ice shovel
by ice cube.
pull out the plug and insert It again
then press the "ON/OFF" button, two
minutes later the machine will restart
automatically.
The magnetic valve
Replace the magnetic valve.
is broken.
wait 3 minutes and press the start
button to restart. When the water has
reached the fill line the ice maker will
restart automatically.
several drops water runs out.
unit till the ice in water tray melt down
2018/01/15 11:14:02 AM

Publicidad

Tabla de contenido
loading

Tabla de contenido