Steelcase FrameOne Boundary Screen Instrucciones De Montaje página 20

Return Leg Assembly
1.
Attach the L brackets to the
Boundary Screen using three (3)
#10-12 x 5/8" wood screws per bracket.
2.
Mark the locations for the pilot
holes in the leg.
3.
Remove the L brackets.
4a.
Use a center punch to stamp
each hole location.
4b.
Drill holes in the FrameOne
leg using 5/32" drill bit.
4b 4a
1
2
3
Page 20 of 63
76550 Rev B