Steelcase FrameOne Boundary Screen Instrucciones De Montaje página 15

3.
Attach one (1) L Bracket to the screen using
ten (10) #10-12 x 5/8 " wood screws per bracket.
4.
Attach two (2) FrameOne Leg Brackets to the screen
using three (3) #10-12 x 5/8" wood screws per bracket.
NOTE: Do not tighten down Leg Brackets
completely. The Leg Brackets are temporarily
attached for locating pilot holes.
5.
Create two (2) or more wood spacers
½" thick.
5
½"
4
Page 15 of 63
76550 Rev B