Troubleshooting - Bosch HBE5451UC Manual De Uso Y Cuidado

Ocultar thumbs Ver también para HBE5451UC:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Troubleshooting

If you encounter a problem, it often will merely be
something minor. Before you call customer service,
consider the suggestions and instructions below:
Fault
The appliance does not work. Faulty fuse
The oven cannot be switched
off.
The clock display flashes.
The oven does not heat.
The door glass is broken.
Fruit juice or albumen stains
on enameled surfaces.
The oven stops operating in
the middle of a program, and
the cooling fan continues to
run at high speed even when
function selector is set to Off
position. The buzzer sounds
intermittently and the control
lamp is flashing.
Possible cause
Notes/remedy
Look in the fuse box and check that the circuit breaker for the
range is in working order.
Power failure
Check whether the kitchen light works.
Electronics are
Switch off the circuit breaker. Call customer service.
faulty
Power failure
Reset the clock.
Faulty fuse
Check the fuse and replace if necessary.
Function selector
Set the function selector.
not set
Switch off the appliance. Call customer service.
Moist cake or meat
Harmless change in the enamel, cannot be removed.
juices
Problem with ther-
1.
mostat
2.
3.
WARNING
9
RISK OF ELECTRIC SHOCK
Incorrect repairs are dangerous.Repairs must only
be carried out by one of our trained customer
service technicians.
Incorrect repairs to your appliance may present
considerable risks for the user.
Set function selector to Off position.
The cooling fan continues to run at high speed.
Wait for 10 seconds.
Set function selector to a new position.
If the error occurs again when setting a new function: Dis-
connect the oven from power supply, then reconnect power
supply.
If the error occurs again after reconnecting power supply:
Call customer service.
15

Publicidad

Tabla de contenido
loading

Tabla de contenido