Retevis RB618 Manual Del Usuario página 5

2. Insert the connecter of data cable into the port of battery pack.
3. Ensure that the port connect with connecter of data cable prop
-erly, while the charging is taking place, the light will glow red.
4. After 3 hours charging, the led indicator will light green which
means the full charge. Now remove the connecter of data cable
from battery pack.
The belt clip align to slots on back of baterry pack
and fixed with screws.
Insert the speaker/microphone plugs into the speaker/micropho
-ne jack of the transceiver.
The transceiver is not fully water resistant when using speaker/
microphone.
I
C
B
D
J
A. Led indicator --- The Led indicator lights continuously red when
transmitting. And lights green when in reception condition.
B. Channel Switch --- short press the channel to increase,
long-press the channel to switch up quickly; at the same
03
M
A G
E
F
H
K
L
04