McCulloch B428 PS Manual De Instrucciones página 2

Dear Customer,
Thank you for choosing a McCulloch product. You are
thereby part of a story that started long ago, when
the McCulloch Corporation started its manufacturing
of engines during World War II. In 1949, when
woodworking would never be the same again.
The line of innovative chainsaws would continue over
airplane and kart engines in the 1950s, then by mini
chainsaws in the 1960s. Later, in the 1970s and 80s,
trimmers and blower vacs were added to the range.
Today, as a part of the Husqvarna group, McCulloch
continues the tradition of powerful engines, technical
innovations, and strong designs that have been our
hallmarks for more than half a century. Lowering
This machine can be
dangerous! Careless or
improper use can cause
serious injury.
Please read the operator's
manual carefully and make
sure you understand the
instructions before using the
machine.
Always use:
long pants, and long sleeves
fogging, vented goggles or
face screen
an approved safety helmet
sound barriers (ear plugs
hearing
Persons with long hair should
hair up.
The operator of the machine
shall ensure, while working,
that no persons or animals
come closer than 15 metres.
Beware of thrown objects and
ricochets.
Maximum rotational frequency
of the spindle, rpm.
INTRODUCTION
fuel consumption, emissions and noise levels are of
friendliness.
your McCulloch product, as it is designed to be your
companion for a long time. By following this operators
manual's advice on usage, service, and maintenance,
its lifespan can be extended. If you should need
professional help with repair or service, please use the
Service Locator at www.mcculloch.com.
McCulloch has a policy of continuous product
development and therefore reserves the right to
modify the design and appearance of products without
prior notice.
This manual can also be downloaded at www.
mcculloch.com.
SYMBOLS
Machines with blades can be
thrown violently to the side
when the blade comes into
A blade is capable of
amputating an arm or leg.
Always keep people and
animals at least 15 metres from
the machine.
Arrows which show limits for
handle mounting.
level at 7,5 metres according
to Australia NSW "Protection
of the Environment Operations
the label.
Noise emission to the
environment according to
the European Community's
in the TECHNICAL DATA
section and on the label.
This product is in accordance
with applicable EC directives.
This product is in accordance
with applicable EAC directives.
This product is in accordance
with the Australian
electromagnetic compatibility
Primer.
Choke control.
XX