Blade FR-TEC SUZUKA WHEEL ELITE NEXT Manual Del Usuario página 10

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
Handbrake function
• The handbrake function has a switch for activation:
a. If the "Handbrake switch" is set to 0/off, the handbrake function is disabled.
b. If the "Handbrake switch" is set to I/on, the handbrake function is enabled.
• If the game does not support the handbrake function, proceed with button mapping:
1. Set the "Handbrake switch" to 0/off.
3. Press the "PROG" button once, the red LED will blink rapidly.
4. Set the "Handbrake switch" to I/on. Then set the "Handbrake switch" to 0/off. The red LED will blink slowly.
5. Press the programming button you want once; the red LED will stay on. (Read "PROGRAMMINGFEATURES" for more
information.)
6. The configuration process is complete.
CONECTION AND INSTALLATION
Connection and installation with Playstation4™
NOTE: Before starting the installation steps make sure that the game console and PS4™ DualShock 4 controller are turned off.
To use the Suzuka Wheel Elite Next on PS4™ follow the steps in the order listed below:
1. Insert the pedal cable into the "Pedal port" on the steering wheel.
2. Insert the shifter cable into the "Shifter port".
3. Connect the original PS4™ DualShock 4™ controller, with the supplied USB cable, to the steering wheel's "Main controller
port". The controller must be turned off. Turn on the console.
4. Connect the USB cable from the steering wheel to the USB port on the PS4™ game console.
5. When the installation is complete, the red LED on the steering wheel will light up, and the PS4™ game console will assign
it a connection channel.
6. With the red LED on the steering wheel on, press the "HOME" button to enter the system menu or access the game.
7. Press the "HOME" button to enter the settings menu or press the "HOME" button for 2 seconds to enter the shutdown
menu.
The connection and installation with PS4™ have two operating modes:
a. Gamepad Mode: activated when connected with the pedals and with the shifter disconnected. In Gamepad mode,
the steering wheel works like the directional buttons, the steering is not progressive. (The "Need for Speed" series only
supports this mode.)
b. Steering Wheel Mode: activated when connected with the pedals and the shifter. In Steering Wheel mode, the steering
angle sensitivity is enabled, and the steering is progressive and identical to the steering of a real steering wheel. (This
mode does not support the vibration function.)
1.
connection and installation with Playstation3™
To use the Suzuka Wheel Elite Next on PS3™ follow the steps in the order listed below:
10

Hide quick links:

Publicidad

Tabla de contenido
loading

Productos relacionados para Blade FR-TEC SUZUKA WHEEL ELITE NEXT

Tabla de contenido