Blade FR-TEC SUZUKA WHEEL ELITE NEXT Manual Del Usuario página 8

BUTTON MAPPING
Mapping features
• Non-configurable fixed buttons (preset)
ZL, R1 / 6 / RB / R, R2 / 8 / RT / ZR
• Configurable pedals and shifters (customisable): left paddle shifter, right paddle shifter, handbrake, clutch pedal, brake pedal,
and accelerator pedal
NOTE: Make sure the handbrake switch is set to off before button mapping.
Button assignment method
1. Press the "PROG" button once, the red LED will blink rapidly.
2. Press once the "pedal or shifter" that you want to configure, the red LED will blink slowly
3. Press once the "non-configurable fixed button" that you want to assign to it; the red LED will stay on.
4. The configuration is complete.
Reset a button assignment
1. Press the "PROG" button once, the red LED will blink rapidly.
2. Press once the pedal or shifter that you wish to reset, the red LED will blink slowly.
3. Press once again the pedal or shifter you wish to reset to factory settings; the red LED will remain steady.
4. The reset process is now complete.
Factory reset
1. Press the "PROG" button once, and the red LED will blink rapidly.
2. Press and hold the "OPTIONS" button for 7 seconds until the red LED is steadily on.
3. The process is now complete. All button, pedal, and shifter settings will be reset, and the steering wheel sensitivity will
be reset to High Level.
Exit button mapping
Options for exiting the button mapping process after step 1 of the "Assignment Method" has been performed:
a. Press the "PROG" button again to exit the configuration sequence.
b. Do not press any other button, shifter, or pedal for 10 seconds and it will automatically exit the mapping mode.
NOTE: These methods do not unable the previous settings.
Steering wheel sensitivity configuration
You can select the sensitivity that best suits your driving style.
You can select from Low, Medium, and High (preset). High = sharp and fast rotation. Low = smooth and progressive rotation.
To change the sensitivity mode:
8
/ 1 / X / Y, / 3 / B / A, / 4 / Y / X, / 2 / A / B, L1 / 5 / LB / L, L2 / 7 / LT /