Blade FR-TEC SUZUKA WHEEL ELITE NEXT Manual Del Usuario página 11

1. Insert the pedal cable into the "Pedal port" on the steering wheel.Insert the shifter cable into the "Shifter port".
2. Turn on the PS3™ game console.
3. Insert the USB cable into the USB port on the game console.
4. After booting, the LED light on the steering wheel will turn on and the PS3 game console will assign it a connection
channel.
5. You can now start the video game or enter the PS3™ menu. Press the "HOME" button to enter the system menu or press
the "HOME" button for 2 seconds to enter the shutdown menu.
To use the Suzuka Wheel Elite Next on PS3™ follow the steps in the order listed below:
a. Gamepad Mode: activated when connected with the pedals and with the shifter disconnected. In Gamepad mode,
the steering wheel works like the directional buttons, the steering is not progressive. (The "Need for Speed" series only
supports this mode.)
b. Steering Wheel Mode: activated when connected with the pedals and the shifter. In Steering Wheel mode, the steering
angle sensitivity is enabled, and the steering is progressive and identical to the steering of a real steering wheel. (This
mode does not support the vibration function.)
Connection and installation with Xbox One™ and Xbox Series X/S™
NOTE: When the manual shifter is connected to the steering wheel, the steering wheel will operate in "Steering Wheel Mode".
This mode does not support the vibration function or the headset function.
NOTE: Before starting the installation steps make sure that the game console and the Xbox One™ or Xbox Series X/S™
controller are turned off.
To use the Suzuka Wheel Elite Next on Xbox One™ or Xbox Series X/S™ follow the steps in the order listed below:
1. Insert the pedal cable into the "Pedal port" on the steering wheel.
2. Insert the shifter cable into the "Shifter port".
3. Connect the original Xbox One™ or Xbox Series X/S™ controller, using the supplied USB cable, to the "Main controller
port" on the steering wheel.
4. Turn on the console.
5. Connect the USB cable from the steering wheel to the USB port of the Xbox One™ or Xbox Series X/S™ game console.
6. When the installation is complete, the red LED on the steering wheel will light up. And the Xbox One™ or Xbox Series X/
S™ game console will assign it a connection channel.
7. With the red LED on the steering wheel on, press the "HOME" button to enter the system menu or access the game.
8. Press the "HOME" button to enter the settings menu or press the "HOME" button for 1 second to enter the shutdown
menu.
The connection and installation with Xbox One™ or Xbox Series X/S™ have two operating modes:
a. Gamepad Mode: activated when connected with the pedals and with the shifter disconnected. In Gamepad mode,
the steering wheel works like the directional buttons, the steering is not progressive. (The "Need for Speed" series only
supports this mode.)
b. Steering Wheel Mode: activated when connected with the pedals and the shifter. In Steering Wheel mode, the steering
angle sensitivity is enabled, and the steering is progressive and identical to the steering of a real steering wheel. (This
mode does not support the vibration function.)
11