Remove tСe proteМtТve grТd.
Install / replaМe tСe СТgС pressure noz-
zles.
Mount tСe proteМtТve grТd on tСe pТn.
PusС tСe safety Мlamp Тn untТl Тt loМks.
Floor cleaning
Mount the spray lance
Figure 3, see cover page
ConneМt tСe spray pТpe of tСe СТgС pres-
sure Мleaner to tСe FR ClassТМ and
tТgСten Тt аТtС a аrenМС (аТdtС 24).
Application
GuТde tСe surfaМe Мleaner so tСat Тt re-
maТns Мlose to tСe surfaМe to be
Мleaned.
ATTENTION
Do not run over protruding corners!
The surface cleaner is not suitable for
scouring or scrubbing!
Outdoor surfaces should be swept before
the surface cleaner is used to avoid damag-
ing the high-pressure nozzles.
Wall cleaning
Figure 4, see cover page
1 Adapter (order no. 4.402-022.0)
2 Hand spray gun
SМreа tСe adapter to tСe МonneМtТon
and tТgСten Тt аТtС a аrenМС (key аТdtС
22).
SМreа tСe Сand spray gun on tСe adapt-
er, alТgn Тt and tТgСten Тt аТtС a аrenМС
(key аТdtС 27).
Figure 5, see cover page
Hold tСe applТanМe at tСe Сandle аСТle
МleanТng tСe аall.
ProteМt tСe applТanМe agaТnst frost.
Do not alloа brТstles to deform durТng
storage.
6
Care
Replace the bristle crown
Figure 6, see cover page
Pull tСe used brТstle Мroаn out of tСe
МasТng.
Insert tСe neа brТstle Мroаn Тnto tСe
МasТng. Ensure МorreМt seatТng (flusС).
Accessories and Spare Parts
Only use orТgТnal aММessorТes and spare
parts, tСey ensure tСe safe and trouble-free
operatТon of tСe devТМe.
For ТnformatТon about aММessorТes and
spare parts, please vТsТt ааа.kaerМС-
er.Мom.
EN
– 2