EN
14
INSTALLATION
1.
Remove all parts of the device from the packaging.
2.
Lay the power cable through the middle of the two stand parts.
3.
Assemble the stand. To do this, hook one part of the stand into the brackets of
the other part.
4.
Turn the body of the tower fan upside down. Place the stand on the body.
Make sure that the column is firmly seated in the stand.
5.
Screw the stand onto the column using the screws provided.
6.
Route the power cable through the guide on the back of the body.
7.
Put the tower back in place. The unit is ready for use.
Column
Screws