Conceptronic C150APM Guía De Instalación Rápida página 22

ENGLISH
Congratulations on the purchase of your
Conceptronic 150
This quick installation guide gives you a step-by-step explanation of how to install and use the
Conceptronic C150APM.
When you need more information or support for your product, we advise you to visit our Service &
Support website at www.conceptronic.net/support and select one of the following options:
• FAQ
: Frequently Asked Questions database
• Downloads
: Manuals, Drivers, Firmware and more downloads
• Contact
: Contact Conceptronic Support
For general information about Conceptronic products visit the Conceptronic website at
www.conceptronic.net.
The information in this quick installation guide is based on Windows 7 and Vista, but can differ from your
computer when you are using a different operating system.
Note: This quick installation guide only explains the basic steps to get the C150APM up and running.
For more info about the various functions of the C150APM, please refer to the user manual
(English only) on the included product CD-ROM. Wait for the autorun menu to appear and select
'View User Manual'.
In order to view the user manual, you will have to have Adobe Reader installed. If you do not
have this installed on your computer, you can select 'Install Adobe Reader' from the autorun
menu (Windows only).
1. Package contents
2. Preconfigured settings
3. The C150APM explained
3.1. Front panel
3.2. Back panel
4. Defining the usage of the C150APM
4.1. Access point mode
4.2. Bridge mode
5. Configuring the computer
5.1. Checking the IP address
5.2. Configuring a fixed IP address
22
Conceptronic C150APM
Quick Installation Guide
Wireless Access Point
N
Table of contents
6. Configuring the C150APM in 'bridge' mode
6.1. Logging in
6.2. Create a bridge connection
7. Connecting to the wireless network
7.1. Connecting manually in Windows 7
7.2. Connecting manually in Windows Vista
7.3. Connecting automatically using WPS
8. Advanced configuration settings