Conceptronic C150APM Guía De Instalación Rápida página 32

ENGLISH
The "Wireless Site Survey" will be shown in a popup window, displaying all found networks in your area.
Note: If your existing wireless network is not shown, it can be out of range, turned off or hidden.
Check if your existing wireless network is running and use the 'Refresh' button to scan again for
wireless networks.
If your wireless network is hidden, it will not be shown in the "Wireless Site Survey". In that
case, close the "Wireless Site Survey" window and enter the exact network name in the field
'MAIN ESSID' at the "Basic Settings" page.
D. Select your existing wireless network where you want to connect to and click the 'Connection'
button.
The "Wireless Site Survey" popup will be closed and the selected wireless network name will be shown in
the field 'MAIN ESSID' at the "Basic Settings" page.
E. Click on the 'Apply' button to apply the settings.
Note: When changing settings in the configuration of the C150APM you will always be asked to choose
between two options:
- Continue
- Apply
F. Click on the 'Continue' button to proceed with changing settings.
32
: Continue to make changes (the changes are not yet saved in the memory).
: Apply all changes by saving them to the memory and restart the C150APM.