Create A Bridge Connection - Conceptronic C150APM Guía De Instalación Rápida

6.2 Create a bridge connection

This chapter will guide you step-by-step through the settings of the C150APM which require configuration
for a bridge connection.
Note: Before you can continue to configure the C150APM in 'bridge' mode, you need the following
information of your existing wireless network:
- Network name (SSID)
- Type of used encryption
- Encryption key / passphrase
A. Click on 'Basic Settings' in the left menu of the web configuration.
The "Basic Settings" will be shown on your screen.
B. Change the 'Mode' to 'Station-Infrastructure'.
C. Click on the 'Select Site Survey' button to find your existing wireless network.
ENGLISH
31