Installation Instructions; Unpack The Refrigerator - Whirlpool WRF767SDHV Manual De Uso Y Cuidado

Ocultar thumbs Ver también para WRF767SDHV:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

LED Lighting
The LED lights do not ever need to be replaced.
MicroEdge
Glo Shelves (on some models)
®
Industry-exclusive MicroEdge
stand out in your refrigerator. By moving LED lighting to a new
spot under the shelves, this leading-edge technology elevates the
look and feel of your refrigerator.

Unpack the Refrigerator

WARNING
Excessive Weight Hazard
Use two or more people to move and install
refrigerator.
Failure to do so can result in back or other injury.
Remove the Packaging
Remove tape and glue residue from surfaces before turning
on the refrigerator. Rub a small amount of liquid dish soap
over the adhesive with your fingers. Wipe with warm water
and dry.
Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator. For
more information, see "Refrigerator Safety."
Dispose of/recycle all packaging materials.

INSTALLATION INSTRUCTIONS

Glo shelves make every snack
®
Door Alarm
A helpful alarm sounds when the refrigerator door or freezer
drawer is left ajar.
Power Outage Indicator
If the power should go out while you are away from home, this
indicator will let you know the refrigerator has been without
power.
When Moving Your Refrigerator:
Your refrigerator is heavy. When moving the refrigerator for
cleaning or service, be sure to cover the floor with
cardboard or hardboard to avoid floor damage. Always pull
the refrigerator straight out when moving it. Do not wiggle or
"walk" the refrigerator when trying to move it, as floor
damage could occur.
Clean Before Using
After you remove all of the packaging materials, clean the inside
of your refrigerator before using it. See the cleaning instructions
in "Refrigerator Care."
Important information to know about glass shelves
and covers:
Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
Tempered glass is designed to shatter into many small,
pebble-size pieces. This is normal. Glass shelves and covers
are heavy. Use both hands when removing them to avoid
dropping.
5

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido