Operation
Using the AUX IN Jack
u
w
v
x
y
1
Connect the unit as described previously.
Press the
turn the unit on.
2
Connect the external unit to the AUX IN
Jack on the rear of this unit. Connecting
an external unit will allow the audio to be
played through your Singing Machine.
Notes:
• It is highly recommended to set the volume
on the auxiliary unit to 1/3 or lower to
avoid distortion.
• Skipping files/tracks is not possible on this
unit when using an external device.
3
Repeatedly press the MODE button to
select the AUX IN mode; "AU" will appear
in the display.
4
Adjust the volume using the MASTER
VOLUME control on this unit or your
external device's volume control.
5
Connect microphone(s) and slide the ON/
OFF switch on the microphone to the ON
position.
— E14 —
ON/STANDBY button to