Power Connection; Connecting To The Wall Outlet; Using The Car Plug; Using The Built- In Battery - Lenco DVP-733 Manual De Instrucciones

Power Connections
•

Connecting to the wall outlet

Caution:
• Do not connect the power plug to a
power outlet other than that which
is indicated here and on the label
as this may result in the risk of fire
or electric shock.
• Do not handle the power plug with
wet hands. Doing so may cause
electric shock.
• Only use AC adapters of the type
specified here. Failure to do so may
case a fire or damage the player.
•

Using the car plug

To DC 9V in
Disconnect this car power adaptor when not in use. Not for use in 24V vehicles.

Using the Built- in battery

The unit has a built-in rechargeable battery (lithium-polymer). Charge the built-in battery before using it for the
first time. It takes about 4 hours to fully charge the battery.
• Make sure that the power switch is set to the Off position before charging.
• To charge the built-in battery, just connect the AC adapter to the player and a specified wall outlet. See
above. (The Battery Charge indicator will light red while it is charging; it will go off when the battery is
fully charged.)
• The built-in rechargeable battery can be used for approximately 300 charge-cycles without any notice-
able change in performance.
• When the built-in battery power is low, the low battery icon will flash on the upper right corner of the
screen for a while, and then the player will turn itself off automatically.
Note:
• Use the specified charger.
• Never dispose of in fire or heat up.
• Do not use in high temperature or near heat sources.
• Do not open the cover.
• Refer servicing only to qualified service personnel.
• To get the longest service life of the built-in battery, charge at indoor-temperature.
CONNECTIONS
15
To DC 9V in Jack
AC adapter:
This AC adapter operates on
100-240V~~50/60Hz 0.3A MAX
DC OUT: 9V
DC current: 1.0A MAX
To the cigarette
lighter socket.