Cupra CHARGER Manual De Instrucciones página 22

B. Provided materials.
Nº DESCRIPTION
1
Fastening kit for main assembly
1.1
Screws M6 x 60 mm
1.2
Plain washers 6.5 mm x 14 mm
1.3
Wall plugs 8 mm x 50 mm
1.4
Torx screws M6 x 16 mm
1.5
Bonded washers 6.6 mm x 11 mm
1.6
Cable gland M25
Cable gland M12 (for CT coil cable)
1.7
Cable gland M12 (for Ethernet cable)*
2
Torx screws M4 x 10 mm for front assembly
3
HMI cable
4
RFID cable*
5
RS485 cable**
* For CUPRA Charger Connect and CUPRA Charger Pro only.
** For CUPRA Charger Pro only.
The following table shows the torque values required for installation.
SCREW TYPE
M4 x 10 mm
M6 x 16 mm
M6 x 60 mm
3x 3x 3x
TORQUE VALUE
2.3 - 2.7 Nm
7.3 - 8.6 Nm
8 - 11 Nm
4x 4x 1x
2 3