Cupra CHARGER Manual De Instrucciones página 33

GR OU P B: SCA LIN G CU RREN T
NOTE
If the wallbox does not
have a CT coil attached
(indicated by DIP-switch
setting of group A =
0000x), then the scaling
current is the maximum
static current of the station.
3 4
NOTE
If the wallbox does have a
CT coil attached, which is
set by DIP-switch group A,
then the scaling current is
the maximum facility
current per phase.
NOTE
If the static max current
is set above the station
rating, an error will be
shown and the wallbox will
be inoperable.