Cupra CHARGER Manual De Instrucciones página 46

APPENDIX.
WARRANTY.
The manufacturer of this wallbox shall not be liable for defects or damage due to the
failure to comply with the operating and installation instructions, nor defects arising
from normal wear and tear.
This liability exclusion particularly applies to:
• Improper storage, installation or use.
• Installation, commissioning or repair by a non-qualified electrician.
• Use of non-original spare parts.
• Use of materials not specified in this manual for installation, operation, maintenance
and/or service of the wallbox will void the warranty and the manufacturer shall not be
liable for defects or damage due to the use thereof. This applies explicitly for materials
containing silicone or phosphorus.
• Modification of the wallbox or its components that can cause the wallbox or its
components to become non-compliant with the intended use.
• Not being able to provide any relevant documentation of the installation conducted
(e.g. commissioning report).
EU DECLARATION OF CONFORMITY.
The Manufacturer declares that this charging station is manufactured
and delivered in accordance with the following directives and regulations:
• EN/IEC 61851-1 (2017)
• EN/IEC 61851-21-2 (2018)
• EN/IEC 61000-3-2 (2014)
• EN/IEC 61000-3-3 (2013)
• EN 301 489-1 V2.2.0
The full CE Declaration of Conformity is available from www.elli.eco/download.
GLO SSARY.
Abbreviations
and acronyms
AC
CP
DC
DIP-switch
ELS
EV
GDPR
HEMS
HMI
• EN 301 489-3 V2.1.1
• EN 301 489-17 V3.2.0
• EN 301 489-52 V1.1.0
• EN 301 908-1 V11.1.1
• EN 301 511 V12.5.1
Meaning
Alternating Current
Control Pilot
Direct Current
Dual In-line Package-switch
Earth Leakage Sensor
Electric Vehicle
General Data Protection Regulation
Home Energy Management System
Human Machine Interface
• EN 300 330 V2.1.1
• EN 300 328 V2.1.1
• EN 301 893 V2.1.1
Abbreviations Meaning
and acronyms
LED Light Emitting Diode
MCB Miniature Circuit Breaker
MID Measuring Instruments Directive
NFC Newar Field Communication
OCPP Open Charge Point Protocol
PE Protective Earth
PCB Printed Circuit Board
RCD Residual Current Detection
RFID Radio-frequency Identification
4 7