Operating Instructions; Switch On And Off - Flex MS 1706 FR Instrucciones De Funcionamiento

Wall chaser MS 1706 FR

Operating instructions

Danger!
Before performing any work on the power
tool, pull out the mains plug.
Before switching on the angle
grinder
n Unpack the wall chaser and check that
no parts are missing or damaged.

Switch on and off

Caution!
Following a power failure, the switched-on
machine will start running again.
– Press the switch (9) and push forwards.
– Lock the switch by depressing it at the
front.
– To switch off the wall chaser, release the
switch by pressing it at the back.
Changing the cutting discs/
changing the groove width
Caution!
Risk of injury! Wear protective gloves.
1. Pull out the mains plug.
2. Lift the lock (5) for the guard hood and
rotate by 180°.
3. Remove the guard hood (3).
4. Press the spindle lock (12) and loosen
the quick-release clamping nut.
Danger!
Risk of injury and damage.
The direction of rotation indicated on the
cutting disc must agree with the direction-of-
rotation arrow on the gearbox (13).
17