Technical Specifications; Disposal Information - Samoa U-TANK 383 100 Guía De Servicio Técnico Y Recambio

SYSTEM INTERFACE
Factory reset
This option allows for erasing all the data inside the unit
(local parameters, calibration data, configuration data,
etc.). A warning message will appear, requesting a
confirmation before erasing all data: press "OK" to
confirm and erase all data, or press
main menu without erasing any data.
+INFO
This option will display relevant data related to the unit
(address, FW version, analog values, etc.).

TECHNICAL SPECIFICATIONS

Voltage input
Current input
Power
Display
Channels
Input connections per channel
Output connections per channel
Output connection for general air
supply solenoid valve
CAN BUS connections
Output
By-pass key switch

DISPOSAL INFORMATION

The symbol above means that
according
regulations your product and/or its
battery
separately from household waste.
When this product reaches its end of
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
to go back to the
115V /230V AC
1.4A/115VAC
0.85A/230VAC
75W
128x64 backlight
LCD display
2
4xdigital,
1x analog
3
1x24VDC
2
24VDC
1
to local laws and
must be disposed
CAUTION! if a factory reset is performed, the unit may
not work properly until all data (local parameters,
configuration data) are sent again to the unit from the
U-Track. Also, if using analog probes, they must be
calibrated again.
192 mm
140 mm
138 mm
life, take it to a collection point designated by local
authorities. The separate collection and recycling of your
product and/or its battery at the time of disposal will help
of conserve natural resources and ensure that it is recycled in
a manner that protects human health and the environment.
EN
103 mm
11
R. 06/20 838 854