Device Overview - Samoa U-TANK 383 100 Guía De Servicio Técnico Y Recambio

EN
INTRODUCTION
WARNING!: This unit is intended for professional
!
use.
Read all the instructions in this manual prior to
use.

DEVICE OVERVIEW

FRONT / BOTTOM VIEW
Nº DESCRIPTION
1 RGB LED graphic bars
2
128x64 backlight LCD display
3 Keypad
4 Status LEDs
5 Bypass key switch
6
Screws (Torx T20) for opening/closing the unit
7 Cable glands
6
4
1
6
Fig. 1
2
838 854 R. 06/20
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
• This unit is intended to be part of a fluid monitoring
system and allow its control.
• Only use the unit for the purposes for which it is
intended.
• This unit has not been approved for use in commercial
transactions.
• Do not alter or modify the unit.
• Observe the manufacturer's safety warnings for the
fluids used.
• Verify the correct settings of the monitoring system prior
to the first use.
BACK VIEW
Nº DESCRIPTION
1 Datasheet label
2 Outer mounting holes
3 Inner mounting holes
6
1
2
3
6
5
Fig. 2
7
2
3
1