AL-KO KHS 3704 Manual De Instrucciones página 41

Maintenance and care
NOTE
Always check the hydraulic oil level with
the log pusher retracted.
1. Tilt the log splitter over the wheels, position
upright and hold securely during the whole
process.
2. Unscrew the oil dipstick (10/1) and wipe
using a clean, lint-free cloth.
3. Insert the dipstick up to the stop and pull out
again.
■
The oil level must be between the marks
"min." and "max." (10). If necessary, top
up hydraulic oil (11/2) using a funnel
(11/1).
4. Check seal (10/2) for damage and replace if
necessary.
5. Screw in the oil dipstick again and tighten
only slightly to avoid damaging the thread of
the cylinder cover.
NOTE
An oil change is not necessary.
462706_l 41