Weather Forecast - Oregon Scientific WMR968 Manual Del Usuario

™ BACKLIGHT
The main unit, when connected to the AC power, is
equipped with an automatic backlight. Every time you
press a window on the main
unit, the ™ backlight will come on for a few seconds.
This function will be disabled for sole battery operation.
The ™ backlight will also come on for a few seconds
when the alarm is triggered.
CALENDAR CLOCK
To set the calendar clock,
1. Press the calendar clock and alarm window.
2. Press and hold [ ] to disable the radio reception function.
3. Press and hold [SET] until the digit flashes.
4. Use [ ] and [ ] to change to the desired setting.
5. Press [SET] for the next item setting.
6. Repeat from Step 4 to finish all the settings for:
- Clock display formats (12hr or 24hr)
- Display language of the day-of-the-week
- Clock
- Calendar display formats (Month-Day, Day-Month)
- Calendar
For the display language, you can choose:
- English (E)
- German (D)
- French (F)
- Italian (I)
- Spanish (S)
7. Press [SET] to confirm.
The calendar clock and alarm window has three displays: clock
with seconds, clock with day-of-the-week and calendar. To
change from one display to another, press the window once.
The calendar clock also supports the following time zones:
- Pacific time (P)
- Mountain time (M)
- Central time (C)
- Eastern time (E)
To select a time zone,
1. Press and hold the calendar clock and alarm window.
2. Press [ ] and [ ] to change.
3. Press the window again to confirm.
THE DAILY ALARM
To set the daily alarm,
1. Press the calendar clock and alarm window.
2. Press [ALARM] and the
indicate you are the alarm mode.
3. Press and hold [SET] until the hour digit flashes.
4. Use [ ] and [ ] to change to the desired setting.
5. Press [SET] for minutes setting.
indicator will display to
6. Use [ ] and [ ] to change to the desired setting.
7. Press [SET] to confirm.
NOTE the window will show "
Once set, the alarm clock will be activated automatically
and the alarm indicator
goes off, press any button to stop it. The alarm is still active
and will go off again the next day.
To deactivate the function,
1. Press the calendar clock and alarm window.
2. Press [ALARM ON/OFF]. The alarm indicator
disappear.

WEATHER FORECAST

The weather forecast is displayed in the weather forecast
and barometric reading window.
There are four readings for the forecast: sunny, slightly
cloudy, cloudy and rainy.
Indicator
displays on
the unit
Forecast Sunny Slightly Cloudy
INDOOR BAROMETRIC READING
The atmospheric pressure reading is displayed in the
weather forecast and barometric reading window.
The pressure reading can be displayed in mb (millibars),
hPa (Hecto-Pascal), inHg (inch mercury) or mmHg
(millimeter mercury).
To select the display unit,
1. Press the weather forecast and barometric reading window.
2. Press [UNIT] repeatedly for the desired setting.
The pressure history for the past 24 hours is displayed in
a six-column bar chart.
To display the pressure reading for a particular hour
within the past 24 hours,
1. Press the weather forecast and barometric reading window.
2. Press [ ] and [ ] for the desired hour.
To set the sea-level pressure,
1. Press the weather forecast and barometric reading
window repeatedly until the "sea-level" icon is displayed.
2. Press [ ] and [ ] for the current (0 Hr) pressure.
3. Press and hold [SET].
4. Press [ ] and [ ] to change to the desired setting.
5. Press [SET] to confirm.
INDOOR AND DEW POINT TEMPERATURES
The current indoor and dew point temperatures, taken by
the indoor baro-thermo-hygrometer, are displayed on the
indoor temperature window. They can be displayed in
degrees Centigrade (˚C) or Fahrenheit (˚F).
4
" if no alarm is armed.
will light up. When an alarm
will
Cloudy Rainy