Troubleshooting; Warranty; Corrective Action - Kobalt KT200A Manual Del Usuario

TROUBLESHOOTING

WARNING: Turn the switch to the "OFF" position and remove the battery pack from the tool
before performing troubleshooting procedures.
PROBLEM
The drill/driver does not
work.
Bit cannot be installed.
Motor overheating.
5-YEAR HASSLE-FREE WARRANTY
This drill/driver is warranted to the original purchaser from the original purchase date for five (5)
years subject to the warranty coverage described herein.
This drill/driver is warranted for the original user to be free from defects in material and
workmanship.
If you believe that the drill/driver is defective at any time during the specified warranty period, simply
return the drill/driver along with proof of purchase to the place of purchase for a free replacement or
refund, or call 1-888-3KOBALT (1-888-356-2258) for warranty service.
This warranty is void if: defects in materials or workmanship or damages result from repairs or
alterations which have been made or attempted by others or the unauthorized use of nonconforming
parts; the damage is due to normal wear, damage is due to abuse (including overloading of the tool
beyond capacity), improper maintenance, neglect or accident; or the damage is due to the use of
the tool after partial failure or use with improper accessories or unauthorized repair or alteration.
This warranty excludes blades, bits, bulbs and accessories.
This warranty gives you specific legal rights, and you may also have other rights that vary from state
to state.
POSSIBLE CAUSE
1. Battery is depleted.
1. Sleeve is not released.
2. Bit does not fit the sleeve.
1. Cooling vents are obstructed.

CORRECTIVE ACTION

1. Charge the battery.
1. Release the sleeve.
2. Use the appropriate bit.
1. Clean, clear vents. Do not cover
vents with hand during operation.
15
Printed in China