Extraordinary Maintenance - Atlas Filtri DOSAPLUS 5 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 9
CHECKS AND MAINTENANCE
Accurate routine maintenance and regular scheduled checks ensure systems operate properly and last in time.
- Check the product level through the clear cup and refill when finished.
- To clean, use only a cloth wetted with water (do not use alcohol or detergents).
- To refill, use only DOSAPHOS original product. The use of different products can damage the dosing unit and
systems, apart from making the guarantee null and void.
- If the dosing unit does not use any product or shows an anomalous consumption, check the nozzle (see
"Extraordinary Maintenance") or contact your Service Centre.
- Not to make the warranty null and void, use only original refills.
Special conditions of use (water quality, operating pressure, etc.) might require maintenance by qualified personnel
(ATLAS FILTRI authorized Service Centres).

EXTRAORDINARY MAINTENANCE

If the polyphosphate does not diminish, the nozzle might be clogged and should be cleaned. Follow the instructions
1 and 2 of "Loading the Dosing Unit", unscrew the nozzle in the head, take it out with some small pliers and clean
the hole with a needle having a 0.2mm diameter.
Once the nozzle has been cleaned, screw it in again into the head and follow instructions 5, 6, 7 and 8 of "Loading
the Dosing Unit".
If the polyphosphate refill is consumed too quickly (regular consumption is 4-6 weeks for a house with 4 people)
change the regular nozzle at diam 1.5 mm with the one at diam 0.3 mm (supplied with the package).
DOSAPLUS 5-6-7 RANGE TECHNICAL SPECIFICATIONS
IN/OUT "
BAR Max
T°C Min
T°C Max
A
1
Warranty
- Keep the label on the box for product identification.
- Applied warranty conditions are those in Directive CEE 85/374 for EU countries. For non EU countries, the product
is covered by a limited 12-month warranty from date of purchase (proof of purchase required). Claims must be
made in writing to the point or sale or to Atlas Filtri srl, Via del Santo 227, I-35010 Limena, Italy. Claims must:
Indicate the product, place and date of purchase; provide the product for review; prove connections between defects
and damages. All disputes are regulated by Italian law and shall be submitted to the Court of Padua, Italy.
DOSAPLUS 5
3/4
8
+4
+45
C
DOSAPLUS 6
1
8
+4
+45
E
DOSAPLUS 7
3/4 + 1
8
+4
+45
A 174 mm
B 208 mm
C 110 mm
D 256 mm
E 174 mm

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dosaplus 6Dosaplus 7

Tabla de contenido