Tools Required; Installing The Fan - LUCCI Air AIRFUSION BALI Instrucciones De Instalación

AIRFUSION BALI Installation Instructions
1 Mounting bracket x1
2 Canopy Cover x1
3 Down rod and ball joint x1
4 Down rod coupling housing
cover x 1
5 Fan motor assembly x1
6 Light kit x1 (18W GX53 lamp is
pre-installed in the light kit)
10 Remote receiver and Remote controller, battery, holder x 1 set

TOOLS REQUIRED:

Phillips / flat head screwdriver
-
Pair of pliers
-
Adjustable spanner
-
Step ladder
-
Wire cutter
-
Wiring, supply cable as required by local provincial and national wiring codes and regulations
-
INSTALLING THE MOUNTING BRACKET
• The ceiling fan must be installed in a location so that the blades are spaced 300mm from the tip of the
blade to the nearest objects or walls.
• Install the hanging bracket to the ceiling joist or structure that is capable of carrying a load of at least 45
kg, with two long screws provided. Ensure at least 30mm of the screw is threaded into the support. (Fig.
2)
NOTE: The bracket screws provided are for use with wooden structures only. For structures other
than wood, the appropriate screw type MUST be used. Ensure the screws used are suitable for the
mounting surface and the surrounding environment.
5 | P a g e
7 Fan Blades x5
8 Fan blade bracket x5
9a Blade mounting screw x10 (1 spare)
9b Blade and bracket assembly screw
and washer x 20 sets (1 Spare set)
9c Mounting bracket Screw x2
9d Blade balancing kit x1 set

INSTALLING THE FAN

45 KG
Fig. 2