Black 1-7/8" Flat Head Screw - Sauder Harbor View 416797 Manual De Instrucciones

Step 11
We recommend using the SAFETY BRACKET (1G) for added stability. Use a BLACK 9/16" LARGE HEAD
å
SCREW (1S) into the top of the unit and a BLACK 1-7/8" FLAT HEAD SCREW (2S) into a stud in your wall.
Push the RUBBER SLEEVES (2R) over the METAL PINS (1R). Insert the METAL PINS into the hole locations of your choice
å
in the ENDS (A and B) and UPRIGHT (C). Set the ADJUSTABLE SHELVES (J) onto the METAL PINS.
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
å
And to celebrate, why not share your success story?
1R
(16 used)
www.sauder.com/services
10 lbs.
50 lbs.
B
J
25 lbs.
C
J
J
25 lbs.
25 lbs.
J
25 lbs.
60 lbs. total
2R
1G
BLACK 9/16" LARGE HEAD SCREW
(1 used into the top of your unit)
A
416797

BLACK 1-7/8" FLAT HEAD SCREW

(1 used into a stud in your wall)
1S
2S
Page 15