Black 1/2" Machine Screw; Black 1-3/8" Flat Head Screw - Sauder Hammond 423527 Manual De Instrucciones

Step 29 Step
1
BLACK 1/2" FLAT HEAD SCREW
(6 used in this step)
2
BB
å
Fasten the EXTENSION SLIDES (2) to the DRAWER
SIDES (BB and CC). Use six BLACK 1/2" FLAT HEAD
SCREWS (28). Use the exact holes shown in the upper view.
3
CC
DD
å
Slide the DRAWER BOTTOM (W) into the grooves in the
DRAWER SIDES (BB and CC) and DRAWER BACK (DD).
Page 34
2
28
Open end
2
CC
With the palm of
your hand, tap
the DRAWER
BOTTOM down
into the grooves.
W
BB
2
These
holes
must be
here.
å
Fasten the DRAWER SIDES (BB and CC) to
the DRAWER BACK (DD). Use four BLACK 1-3/8" FLAT
HEAD SCREWS (23).
4
BB
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
FRONT groove.
å
Fasten the DRAWER FRONT (AA) to the DRAWER
SIDES (BB and CC). Tighten four HIDDEN CAMS.
å
Fasten a KNOB SET (10) to the DRAWER FRONT (AA). Use a

BLACK 1/2" MACHINE SCREW (30).

www.sauder.com

BLACK 1-3/8" FLAT HEAD SCREW

(4 used in this step)
DD
BB
BLACK 1/2" MACHINE SCREW
(1 used in this step)
CC
23
CC
Groove
30
AA
10
423527