Basic Operations - JVC KD-SX870 Manual De Instrucciones

1
3
1
Note on One-Touch Operation:
When you select a source in step 2 below, the power automatically comes on.
You do not have to press this button to turn on the power.
2
3
4
Adjust the sound as you want (see pages 15 – 19).
To drop the volume in a moment
Press briefly while listening to any source. "ATT" starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the button briefly again.
To turn off the power
Press for more than 1 second. "SEE YOU" appears, then the unit turns off.
CAUTION on Volume Setting
CDs produces very little noise compared with other sources. If the volume level is adjusted for the
tuner, for example, the speakers may be damaged by the sudden increase in the output level.
Therefore, lower the volume before playing a CD and adjust it as required during playback.

BASIC OPERATIONS

Turn on the power.
"HELLO" appears on the display.
Select the source.
To operate the tuner, see pages 6 – 10.
To operate the CD player, see pages 11 – 14.
To operate the CD changer, see pages 29 – 31.
To operate the external component, see page 32.
Adjust the volume.
Volume level indicator
Note:
When you use this unit for the
first time, set the built-in clock
correctly, see page 20.
2
Volume level appears
5