External Component Operations; Playing An External Component - JVC KD-SX870 Manual De Instrucciones

EXTERNAL COMPONENT OPERATIONS

Playing an external component

You can connect the external component to the CD changer jack on the rear using the Line
Input Adaptor KS-U57 (not supplied).
Preparations:
• For connecting the Line Input Adaptor KS-U57 and the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the following procedure, select the external input
correctly. (See "Selecting the external component to use" on page 25.)
1
Note on One-Touch Operation:
When you press CD-CH, the power automatically comes on. You do not have to press
2
Turn on the connected component and start playing the
source.
3
32
3
Select the external component.
* Displayed only when one of the following sources is selected
— FM, AM and CD.
• If "LINE IN"* does not appear on the display, see page 25
and select the external input ("EXT IN").
to turn on the power.
Adjust the volume.
1