Publicidad
Idiomas disponibles
Idiomas disponibles
Installation of New Grille
1. Install upper and lower grille assembly to the front fascia by
securing the tabs and grille clips.
2. Reinstall palnuts onto grille emblem.
3. Tighten screws to 9 Nm (80 lb in).
FIGURE 4A
1
1
4. Install front fascia to vehicle.
a. Connect the fog lamp connectors.
b. Install fascia retainers.
c. Tighten fascia screws to 9 Nm (80 lb in).
FIGURE 5A
2
Chevrolet Tahoe/Suburban/Avalanche Grille Inserts IR 04OC05
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCOR-
DANCE WITH GMSPO SPECIFI-
CATIONS.
2
3
REVISION
AUTH
5. Install headlamp assembly.
a. Connect the electrical connectors.
b. Tighten headlamp screw to 2 Nm (18 lb in). See callout
2 in Figure 6.
c. Tighten headlamp screw to 9 Nm (80 lb in). See callout
3 in Figure 6.
d. Repeat for opposite side of the vehicle.
FIGURE 6A
1
4
2
3
2
1
PART NO.
INSTALLATION INSTRUCTIONS
DR
TITLE
Chevrolet Tahoe/Suburban/Avalanche
PART NO.
88968438
6200 Grand Pointe Dr., Grand Blanc, MI 48439
5
1
88968438
SHEET
Grille Inserts
2
SHEET
2
3
2
6
OF
6
OF
Publicidad
