Creating Limits For Individual Readings; Creating Limits For A New Batch; Selecting Saved Limits; Renaming Limits - Elcometer 500 Guia Del Usuario

8 SETTING LIMITS - MODEL T (continued)

8.1 CREATING LIMITS FOR INDIVIDUAL READINGS

1 Press Menu/Limit Memories/Create Limit Memory/Set Upper
Limit (or 'Set Lower Limit').

2 Use the
3 If required, repeat Step 2 for 'Set Lower Limit' (or 'Set Upper
Limit') and 'Set NDFT'.
4 When all values have been set, use the
'Save Limit Memory n' and press 'Select' to save.

8.2 CREATING LIMITS FOR A NEW BATCH

1 Press Batch/New Batch/Batch Limits/Create Limit Memory/
Set Upper Limit (or 'Set Lower Limit').

2 Use the
3 If required, repeat Step 2 for 'Set Lower Limit' (or 'Set Upper
Limit') and 'Set NDFT'.
4 When all values have been set, use the
highlight 'Save Limit Memory n' and press 'Select' to save.
Batch limits can be viewed at any time via Batch/Review Batch/Batch
Information.

8.3 SELECTING SAVED LIMITS

1 Press Menu/Limit Memories/Select Limit Memory or when in
Batching, press Batch/New Batch/Batch Limits/Select Limit
Memory.

2 Use the
press 'Select'.
When a limit memory is in use,
measurement screen, where n = the limit memory index number.

8.4 RENAMING LIMITS

1 Press Menu/Limit Memories/Edit Limit Memory/Rename Limit
Memory.

2 Use the
and press 'Select'.
Use the  softkeys to rename the limit memory.
3
4 Select 'Ok' to save the changes or 'Escape' to exit and disregard
any amendments made.
www.elcometer.com
softkeys to set the required value and press 'Set'.

softkeys to set the required value and press 'Set'.

softkeys to highlight the limit memory required and

softkeys to highlight the limit memory to be renamed





is displayed to the right of the
softkeys to highlight
softkeys to
en-14
R