asalvo COLECHO FOLD Guia Del Usuario página 14

• The thickness of the mattress chosen shall be such that the vertical internal
height (surface of the top of the mattress to the upper edge of the bed sides) is a
least 200mm in the highest position of the bed base.
• Use just sold or approved accessories.
• Use just recommended spare parts.
• Pay attention to the eventual risk of fire and other important sources of heat, as
central heating or gas heaters nearby the cot.
• The grey line drawn on the inner wall of the product marks the height of the
mattress
• When the mattress is in use, ALWAYS close the zipper completely and push the
zipper head inside the flap cover to avoid accessibility to filling materials.
• The length and width of the mattress shall be such that the maximum gap
between the mattress and the sides and ends does not exceed 30 mm
EN
1. Remove the frame from the box carefully. The mini crib should be placed on a
horizontal floor.
2. Press down on each leg until they lock.
3. Lift the top frame until it locks.
WARNING
ASSEMBLY