Operation
MODE
ON/OFF
SPEED
UP
TIMER
DOWN
CANCEL
Power Control
The power control turns the unit on and off.
Mode Control
The Mode Control has 3 settings:
•Cool • Dehumidify • Fan
The settings are adjusted by Mode Control
button.
• C ooling Mode
During the cooling mode the air is cooled and
hot air is exhausted to the outside through the
exhaust tube. Adjust fan speed and air
temperature to suit your desired comfort level.
Note: The air exchange hoses must vent
outside the room when using Cool Mode.
• Dehumidify Mode
Air is dehumidified when the unit is not in full
cooling mode. If room temperature is greater
than 25 degrees Celsius, fan speed can be
adjusted; otherwise fan speed is fixed to" low."
Note: Air exchange hoses must vent inside
when in Dehumidify Mode; otherwise some
cooling will occur.
• Fan Mode
Air is circulated throughout the room with
no cooling.
Note: Unit does not need to be vented in
Fan Mode.
Fan Speed Control
The Fan Speed Control has 4 settings: Auto,
High, Medium, and Low.
Temp Set Controls
Press "Up" or "Down" to set temperature,
The setting range is from 64ºF~89ºF.
Note: When choose DEHUMIDIFITY or FAN
MODE, temperature setting button is invalid.
Fahrenheit/Celsius Selector
When you press the ºC/ºF switch buttons, the unit
will switch between of ºC and ºF.
Note: Initial setting is ºF
Timer Setting Control
• Press timer setting button during unit operation
to set shut-off time. The timer setting button will
set the timer to turn off the unit.
• P ress timer setting button during unit standby
to set turn-on time. The timer setting button will
set the timer to turn on the unit.
• I f you press the ON/OFF button when the timer
is set, the timer function is cancelled.
• Timer setting range is 1-24 hours.
Timer Cancel Control
If you press the "Timer Cancel Button," the timer
setting is cancelled.
English
(7)