FILLING THE JACKET
FILL THE CAVITY WITH COLD MACHINE,
USING ONLY DEMINERALIZED WATER.
- Unscrew the screw cap "S2" placed on the safety
valves group.
- Open the level tap " L ".
- Pour demineralized water into the fi lling hole.
- Stop pouring when water begins to fl ow from the
level tap " L ".
- Re-screw accurately the screw cap "S2" in the right
position.
FILLING AND EMPTYING OF THE TANK
FILLING
- Open the lid.
- Turn the handle of the front discharge tap
clockwise. The tap is only completely closed when
the handle is in the vertical position.
- Lift and turn the handle of the front discharge tap
anti-clockwise. When the tap is open the handle
remains in the horizontal position.
- Fill the well until the water is level with the
maximum level indicated on the wall of the well. Do
not use the appliance with the water level above
the maximum indicated level.
- To halt filling, turn the knob clockwise.
EMPTYING
- Lift and turn the handle of the front discharge tap
anti-clockwise.When the tap is open the handle
remains in the horizontal position.
SWITCHING ON AND OFF
The control knob has the following positions:
OFF
MINIMUM TEMPERATURE
INTERMEDIATE TEMPERATURES
MAXIMUM WATER TEMPERATURE
SWITCHING ON
- Turn
the
thermostat knob
temperature setting for cooking.
- the yellow and the green indicator lamp turn on.
-
- The yellow indicator light switches off when the
oven reaches the set temperature.
TURNING OFF
-
Turn the thermostat knob to position " 0 " .
- the yellow and the green indicator lamp turn off.
14. PROLONGED DISUSE
Before any prolonged disuse of the appliance,
proceed as follows:
- Clean the appliance thoroughly.
- Rub stainless steel surfaces with a cloth soaked in
vaseline oil to create a protective film.
- Close cocks or main switches ahead of the
appliances.
Following prolonged disuse, proceed as follows:
- Inspect the appliance thoroughly before using it
again.
- Allow electric appliances to operate at the lowest
temperature for at least 60 minutes.
24
to
the
chosen