Disposal Of Packing And Of The Appliance; Safety Devices; Instructions For Installation; Reminders For The Installer - Gastrodomus 70/70 PGI Instalación, Uso, Mantenimiento

1. DISPOSAL OF PACKING AND OF THE
APPLIANCE
PACKING
The packing is made using environmentally friendly
materials. The plastic recyclable components are:
- the transparent cover, the bags containing the
instructions manual
Polyethylene - PE).
- the straps (in Polypropylene - PP).
APPLIANCE
- The appliance is manufactured 90% from recyclable
metals (stainless steel, aluminium sheet, copper.. ..
).
- The appliance must be scrapped in compliance with
current regulations governing such disposal.
- Make the appliance unusable before scrapping.
- It must be disposed of properly.
THE SYMBOL SHOWING A CROSSED-OUT
WASTE CONTAINER ON THE UNIT OR
PACKAGE INDICATES THAT, AT THE END
OF ITS LIFE CYCLE, THE PRODUCT MUST
BE COLLECTED SEPARATE FROM OTHER
WASTE.
THE DIFFERENTIATED COLLECTION OF THIS
EQUIPMENT IS ORGANISED AND MANAGED BY
THE PRODUCER.
THE USER WHO INTENDS TO GET RID OF THIS
EQUIPMENT SHALL CONTACT THE PRODUCER AND
FOLLOW THE SYSTEM THAT THE LATTER HAS USED
IN ORDER TO COLLECT THE EQUIPMENT
SEPARATELY AT THE END OF ITS LIFE.
PROPER SEPARATE COLLECTION HELPS PREVENT
POSSIBLE NEGATIVE IMPACTS ON THE
ENVIRONMENT AND HEALTH, AND FAVOURS THE
REUSE AND/OR RECYCLING OF THE UNIT'S
MATERIALS.
ABUSIVE DISPOSAL OF THE PRODUCT BY THE
HOLDER WILL RESULT IN THE APPLICATION OF
PENALTIES AS PER CURRENT STANDARDS.

2. SAFETY DEVICES

INDIRECT HEAT ELECTRIC BOILING PAN
and nozzles (made
SAFETY THERMOSTAT
THE MANUFACTURER WILL NOT BE
LIABLE FOR ANY DAMAGE OR INJURY
RESULTING FROM FAILURE TO
OBSERVING THE FOLLOWING RULES.
- To reactivate the equipment is necessary to fill up
the cavity. See paragraph "cavity filling"
- To restore appliance operation, remove the control
of
panel and press the thermostat reset button. This
procedure must only be carried out by a qualified,
authorized technician.
MANOMETER
The appliance is equipped with a manometer,
positioned on the control panel, which indicates the
steam pressure inside the jacket.
SAFETY VALVE
The appliance is equipped with an automatic safety
valve (H), positioned on the countertop, which
releases the steam contained in the jacket when
steam pressure approaches 50kPa (0,5 bar).
ANTI -DEPRESSION VALVE
The appliance is equipped with an automatic valve,
positioned on the countertop, which allows air to
enter the jacket when the appliance cools.
AUTOCLAVE PANS
The appliance is equipped with an automatic safety
valve, built into the lid, which discharges steam built
up in the tank when steam pressure approaches
0.05 Bar.
INSTRUCTIONS FOR
II.
INSTALLATION

3. REMINDERS FOR THE INSTALLER

READ THIS MANUAL CAREFULLY. IT
PROVIDES IMPORTANT INFORMATION
FOR SAFE INSTALLATION, USE AND
MAINTENANCE OF THE APPLIANCE.
18