Gastrodomus ALP/3000 Uso Y Mantenimiento página 21

CUTLERY DRYER/POLISHER
REPLACING THE "CORNCOB" POWDER
Replace the "corncob" powder once a month.
1. Lift the container guard (B).
2. Vacuum the "corncob" powder in the tank and clean it thoroughly.
Caution - Precaution
Only clean with suitable detergents. Never use corrosive or flammable cleaning
products or products that contain substances harmful to human health.
3. Insert the NEW "corncob" powder in the tank.
4. Close the container guard (B).
REPLACING THE UV LAMP
Caution - Precaution
DO NOT touch the UV lamp (C) with your hands; use latex gloves.
1. Lift the container guard (B).
2. Remove the UV lamp (C) and replace it with a NEW one.
3. Close the container guard (B).
TROUBLESHOOTING
The table contains the list of anomalies that may occur during normal operation and indi-
cates possible solutions.
Some faults may be corrected directly by the user, while others require the assistance of
qualified personnel.
Qualified personnel must have acknowledged experience gained in the specific field of in-
tervention.
Important
Do not remove internal appliance parts. The manufacturer is not liable for any ma-
chine tampering!
Table 2: Operating malfunctions
Problem
The equipment does not start.
Causes
Main switch off.
No mains power.
The container guard is not correctly
closed.
Fuse burnt-out.
- 9 -
ALP/3000 - ALP/6000
Solutions
Turn on main switch.
Contact your dealer or authorised
service centre.
Make sure the guard is correctly
closed
Contact customer service.
English language
EN