Publicidad
Idiomas disponibles
Idiomas disponibles
1. Removal
Installation
NOTE: The following descriptions
1. Loosen the screw of balancer
with a + driver several turns
and pull the balancer assembly
out of the handlebars.
NOTE: Loosen the screw only
2. Remove the lever pivot bolt and
nut.
NOTE: Disuse the removed lever
refer to operations to be
made for the left side of
the vehicle. Carry out the
same operations for the
right side also.
enough to remove the bal-
ancer. Otherwise, the bal-
ancer may disassemble
and
some
components
may remain in the handle-
bar.
Disuse the removed screw.
pivot bolt and nut.
Lever pivot bolt
Lever pivot bolt
GENUINE SUZUKI ACCESSORIES
3/5
Balancer
Balancer
Screw
Screw
Nut
Nut
Publicidad
