Sauder 409043 Manual De Instrucciones página 24

Step 19
First, lay the LAPTOP PAD (DDD) so the velcro attached
å
to the pad is facing up.
Next, peel off the paper from the adhesive side.
å
Finally, fl ip the pad over and press it fi rmly onto the center
å
of the LAPTOP SHELF (Q).
Fasten the BLACK DRAWER SLIDES (MM and NN) to the
å
SHELF MOLDINGS (BB). Use four BROWN 1" FLAT
HEAD SCREWS (LLL).
NOTE: The DRAWER SLIDES are marked "DRAWER
å
RIGHT" and "DRAWER LEFT" for easy identifi cation.
Lay the LAPTOP SHELF (Q) with the LAPTOP
å
PAD (DDD) facing down in the notched edges
of the SHELF MOLDINGS (BB).
NN
Page 24
Q
BB
BB
MM
1. With the velcro centered, peel off the
paper so the adhesive side is facing up.
2. Carefully fl ip the pad over and press it
fi rmly onto the LAPTOP SHELF.
Notched edge
LLL
BROWN 1" FLAT HEAD SCREW
(4 used in this step)
409043
Q
www.sauder.com/services
DDD