Intel Pentium III Guia De Inicio Rapido página 4

Figure B
Intel recommends the boxed Intel
package for motherboards that utilize the 370-pin socket, and are validated
specifically for these processors. However, if you find it necessary to utilize a "slot-to-
socket adapter (SSA)" [see Figure B] then please be aware of the following critical
considerations.
1. The SSA must be recommended for use by the motherboard manufacturer
for use with this specific processor and motherboard combination.
2. The SSA must run the processor within Intel's electrical, mechanical, and
thermal specifications.
3. Intel does not validate SSAs for use with its branded boards or 3rd-party
motherboards.
Severe mechanical and electrical damage may occur to the processor, motherboard, or
both, if these recommendations are not carefully followed. For more detailed
information on this subject, Intel urges you to go to the following url:
http://support.intel.com/support/processors
370-pin socket
SSA
®
Pentium
®
III processor in the Flip-Chip PGA