KTM Power Parts 60312968244 Manual Del Usuario página 5

2
5 6
4
8
9
10
12
11
12
5
12
12
13
4
Scope of supply:
1x crash bar, right (1)
1
1x crash bar, left (2)
4x clamps (3)
4x clamp adapters (4)
1x oil filler neck holder (5)
2x collar screws M10x60 (6)
2x collar screws M10x30 (7)
7
8x collar screws M6x16 (8)
3 2 x cap head screws M6 x 16 (9)
2x hexagon nuts M6 (10)
Preliminary work
- Remove screws (11) and (12) and take off the fuel tank guard.
11
Assembly
7
- Position the oil filler neck holder (5) (included) and tighten (45Nm) with
collar screw M10x30 (7) (included).
- Mount the oil filler neck with screws (12) (original part).
- Position and tighten collar screw M10x30 (7) (included) on the right vehi-
cle side (45Nm).
7
- Position the clamp adapter (4) (included).
- Remove the rubber mount (original part) for the tank from the fuel tank
guard (original part).
- Mount the rubber mount (13) (original part) for the tank with the original
screws but do not tighten yet.
13
4
76012968040
0035100609S
0035100309S
0025060166
0912060166
0985060003
5