Bluetooth Pairing; Manual Pairing - Soundcore Liberty 3 Pro Manual De Usuario

Bluetooth Pairing

Automatic Pairing*
1. Open the charging case, and the earbuds will automatically enter Bluetooth
pairing mode.
• The 2 LED indicators inside the charging case will flash white.
2. Select "Soundcore Liberty 3 Pro" on your device's Bluetooth list to connect.
• When successfully connected, the 2 LED indicators will pulse white.
1
*Automatic pairing is available only for earbuds in factory mode.

Manual Pairing

1. Place the earbuds in the charging case and leave the case open.
2. Press and hold the button on the charging case for 3 seconds until the 2 LED
indicators inside the charging case flash white.
1
Multipoint
The earbuds can connect with two Bluetooth devices at the same time. There are
two ways to pair with another device.
05 EN
2
Soundcore
PAIRING
Liberty 3 Pro
Soundcore
Liberty 3 Pro
2
CONNECTED
3s
PAIRING